**PEDA Manager Syllabus 2021: PEDA Assistant Manager Syllabus and PEDA AM & Programmer Syllabus** with Exam Pattern is mentioned here. Collect the PEDA Manager Written Exam Syllabi 2021 to know the complete subject wise topics in this page and prepare well to secure the maximum marks in the written examination. Download the PEDA Manager Previous Year Question Papers and Model Papers for Driver Posts in this page using the given links. Verify the PEDA Manager Written Exam Syllabus along with downloading E – Admit Cards at online mode. Keep visiting https://freshersexams.com to know the PEDA Manager Recruitment 2021 latest updates.

Origination Name |
Punjab Energy Development Agency (PEDA) |

Name of Post |
Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation), Programmer |

No. of Vacancy |
24 Posts |

Selection Process |
Written Exam |

Exam Date |
— |

Application Submission Start Date |
03.09.2021 |

Last Date to Apply Online |
23.09.2021 |

Table of Contents

## PEDA Manager Syllabus 2021

Candidates can check out the PEDA Manager Syllabus 2021 with Exam Pattern all subjects. Download Syllabus for all subject wise. Check PEDA Assistant Manager Syllabus 2021 available here released by PEDA. Get PEDA Programmer Syllabus pdf download and Exam Pattern. The PEDA Manager Written Exam Syllabus 2021 Download in PDF format for the all posts. Download Syllabus pdf and know the Exam pattern to check the subject name, question papers, total marks. Applied candidates must refer the given Syllabus, exam dates. PEDA Manager Written Exam Syllabus 2021 and Exam Pattern. The candidates who are going to attend the PEDA AM exam can check the syllabus from this page.

**Manager, Assistant Manager (Technical), Assistant Manager (Accounts), Assistant Manager (Public Relation) and Programmer**

**PART-I (40 MARKS)**

**GENERAL ENGLISH Grammar:** Fill in the blanks, Error Spotting/ Sentence Correction, Voices and Narrations, Para jumble; Vocabulary: One-word substitution, Idioms & Phrases, Spelling Errors, Antonym/Synonym; Reading Comprehension: Passage, Cloze Test.

**APTITUDE**

Number systems, Decimal fractions, Square roots and cube roots, Average, Age problems, Calculation of percentage, Profit and loss, Ratio and proportions, Time and work, Distance and time, Problem on trains, Mixtures, Calendar, Clocks, Probability, Odd man out & series, Bar graph, Pie chart.

**REASONING**

**General Mental Ability:** Alphabet Test, Analogy, Arithmetic Reasoning, Blood Relation, Classification, Puzzle test, Data sufficiency, Number test, Coding decoding, Distance direction test, Logical Venn diagram, Missing Number; Non-Verbal Reasoning: Paper cutting & folding, Embedded figures, Figure formation & Analysis, Series, Cube & Dice, Mirror Image, Water Image, Pattern Completion.

**GENERAL KNOWLEDGE**

History of India, Indian and world geography, Indian polity and governance, Economic and social development, General science, Environmental ecology and climate change, Current affairs, Basic knowledge about Punjab state, Renewable Energy status of world, India and Punjab.

**PART-II (60 MARKS)**

**ENGINEERING DISCIPLINE**

**Electrical Engineering, Electrical & Electronics Engineering**

**Section 1:** Electric circuits Network elements: ideal voltage and current sources, dependent sources, R, L, C, M elements; Network solution methods: KCL, KVL, Node and Mesh analysis; Network Theorems: Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorem; Transient response of dc and ac networks, sinusoidal steady-state analysis, resonance, two port networks, balanced three phase circuits, star-delta transformation, complex power and power factor in ac circuits, Magnetic circuits, Self and Mutual inductance of simple configurations

**Section 2:** Electrical and Electronic Measurements Bridges and Potentiometers, Measurement of voltage, current, power, energy and power factor; Instrument transformers, Digital voltmeters and multimeters, Phase, Time and Frequency measurement; Oscilloscopes, Error analysis.

**Section 3:** Signals and Systems Representation of continuous and discrete time signals, shifting and scaling properties, linear time invariant and causal systems, Fourier series representation of continuous and discrete time periodic signals, sampling theorem, Applications of Fourier Transform for continuous and discrete time signals, Laplace Transform and Z transform. R.M.S. value, average value calculation for any general periodic waveform

**Section 4:** Electrical Machines Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; Three-phase transformers: connections, vector groups, parallel operation; Auto-transformer, Electromechanical energy conversion principles; DC machines: separately excited, series and shunt, motoring and generating mode of operation and their characteristics, speed control of dc motors; Three-phase induction machines: principle of operation, types, performance, torque-speed characteristics, no-load and blocked-rotor tests, equivalent circuit, starting and speed control; Operating principle of single-phase induction motors; Synchronous machines: cylindrical and salient pole machines, performance and characteristics, regulation and parallel operation of generators, starting of synchronous motors; Types of losses and efficiency calculations of electric machines.

**Section 5:** Power Systems Basic concepts of electrical power generation, ac and dc transmission concepts, Models and performance of transmission lines and cables, Economic Load Dispatch (with and without considering transmission losses), Series and shunt compensation, Electric field distribution and insulators, Distribution systems, Per-unit quantities, Bus admittance matrix, Gauss- Seidel and Newton-Raphson load flow methods, Voltage and Frequency control, Power factor correction, Symmetrical components, Symmetrical and unsymmetrical fault analysis, Principles of overcurrent, differential, directional and distance protection; Circuit breakers, System stability concepts, Equal area criterion.

**Section 6:** Control Systems Mathematical modeling and representation of systems, Feedback principle, transfer function, Block diagrams and Signal flow graphs, Transient and Steady-state analysis of linear time invariant systems, Stability analysis using Routh-Hurwitz and Nyquist criteria, Bode plots, Root loci, Lag, Lead and Lead-Lag compensators; P, PI and PID controllers; State space model, Solution of state equations of LTI systems.

**Section 7:** Power Electronics Static V-I characteristics and firing/gating circuits for Thyristor, MOSFET, IGBT; DC to DC conversion: Buck, Boost and Buck-Boost Converters; Single and three-phase configuration of uncontrolled rectifiers; Voltage and Current commutated Thyristor based converters; Bidirectional ac to dc voltage source converters; Magnitude and Phase of line current harmonics for uncontrolled and thyristor based converters; Power factor and Distortion Factor of ac to dc converters; Single-phase and three-phase voltage and current source inverters, sinusoidal pulse width modulation.

**Section 8:** Renewable Energy Sources Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy; Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS; Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes; Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine; Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion; Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits; Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.

**Instrumentation Engineering, Electronics and Instrumentation**

**Section 1: Sensors and Industrial Instrumentation**

Resistive-, capacitive-, inductive-, piezoelectric-, Hall effect sensors and associated signal conditioning circuits; transducers for industrial instrumentation: displacement (linear and angular), velocity, acceleration, force, torque, vibration, shock, pressure (including low pressure), flow (variable head, variable area, electromagnetic, ultrasonic, turbine and open channel flow meters) temperature (thermocouple, bolometer, RTD (3/4 wire), thermistor, pyrometer and semiconductor); liquid level, pH, conductivity and viscosity measurement. 4-20 mA two-wire transmitter.

**Section 2: Communication and Optical Instrumentation**

Amplitude- and frequency modulation and demodulation; Shannon’s sampling theorem, pulse code modulation; frequency and time division multiplexing, amplitude-, phase-, frequency-, quadrature amplitude, pulse shift keying for digital modulation; optical sources and detectors: LED, laser, photo-diode, light dependent resistor, square law detectors and their characteristics; interferometer: applications in metrology; basics of fiber optic sensing. UV-VIS Spectro photometers, Mass spectrometer.

**Section 3: Electrical Circuits and Machines**

Voltage and current sources: independent, dependent, ideal and practical; v-i relationships of resistor, inductor, mutual inductance and capacitor; transient analysis of RLC circuits with dc excitation.

Kirchoff’s laws, mesh and nodal analysis, superposition, Thevenin, Norton, maximum power transfer and reciprocity theorems.

Peak-, average- and rms values of ac quantities; apparent-, active- and reactive powers; phasor analysis, impedance and admittance; series and parallel resonance, locus diagrams, realization of basic filters with R, L and C elements. transient analysis of RLC circuits with acexcitation. One-port and two-port networks, driving point impedance and admittance, open-, and short circuit parameters.

Transformer: Types, equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency; Three phase induction motors: principle of operation, types, performance, torque-speed characteristics, no-load and blocked rotor tests, equivalent circuit, starting and speed control; Types of losses and efficiency calculations of electric machines, Magnetic circuits, Self and Mutual inductance of simple configurations.

**Section 4:** Signals and Systems Periodic, aperiodic and impulse signals; Laplace, Fourier and z-transforms; transfer function, frequency response of first and second order linear time invariant systems, impulse response of systems; convolution, correlation. Discrete time system: impulse response, frequency response, pulse transfer function; DFT and FFT; basics of IIR and FIR filters.

**Section 5:** Control Systems Feedback principles, signal flow graphs, transient response, steady-state-errors, Bode plot, phase and gain margins, Routh and Nyquist criteria, root loci, design of lead, lag and lead-lag compensators, state-space representation of systems; time-delay systems; mechanical, hydraulic and pneumatic system components, synchro pair, servo and stepper motors, servo valves; on-off, P, PI, PID, cascade, feedforward, and ratio controllers, tuning of PID controllers and sizing of control valves.

**Section 6:** Analog Electronics Characteristics and applications of diode, Zener diode, BJT and MOSFET; small signal analysis of transistor circuits, feedback amplifiers. Characteristics of ideal and practical operational amplifiers; applications of opamps: adder, subtractor, integrator, differentiator, difference amplifier, instrumentation amplifier, precision rectifier, active filters, oscillators, signal generators, voltage controlled oscillators and phase locked loop, sources and effects of noise and interference in electronic circuits.

**Section 7:** Digital Electronics Combinational logic circuits, minimization of Boolean functions. IC families: TTL and CMOS. Arithmetic circuits, comparators, Schmitt trigger, multi-vibrators, sequential circuits, flipflops, shift registers, timers and counters; sample-and-hold circuit, multiplexer, analog-to-digital (successive approximation, integrating, flash and sigma-delta) and digital-to-analog converters (weighted R, R-2R ladder and current steering logic). Characteristics of ADC and DAC (resolution, quantization, significant bits, conversion/settling time); basics of number systems, Embedded Systems: Microprocessor and microcontroller applications, memory and input- output interfacing; basics of data acquisition systems, basics of distributed control systems (DCS) and programmable logic controllers (PLC).

**Section 8:** Measurements SI units, standards (R,L,C, voltage, current and frequency), systematic and random errors in measurement, expression of uncertainty – accuracy and precision, propagation of errors, linear and weighted regression. Bridges: Wheatstone, Kelvin, Megohm, Maxwell, Anderson, Schering and Wien for measurement of R, L, C and frequency, Q-meter. Measurement of voltage, current and power in single and three phase circuits; ac and dc current probes; true rms meters, voltage and current scaling, instrument transformers, timer/counter, time, phase and frequency measurements, digital voltmeter, digital multimeter; oscilloscope, shielding andgrounding.

**Section 9:** Renewable Energy Sources Solar energy: Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy; Wind energy: Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS; Biomass Energy: Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes; Small Hydropower: Overview of micro, mini and small hydro system, Types of hydro turbine; Ocean Energy: Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion; Geothermal energy: Origin of geothermal resources, Types of geothermal energy deposits; Hydrogen: Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.

**Civil Engineering**

**Section 1: Structural Engineering**

**Engineering Mechanics:** System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Frictions and its applications; Centre of mass; Free Vibrations of undamped SDOF system.

**Solid Mechanics:** Bending moment and shear force in statically determinate beams; Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, Transformation of stress; buckling of column, combined and direct bending stresses.

**Structural Analysis:** Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams, cables and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis.

**Construction Materials and Management:** Construction Materials: Structural Steel – Composition, material properties and behaviour; Concrete – Constituents, mix design, short- term and long-term properties. Construction Management: Types of construction projects; Project planning and network analysis – PERT and CPM; Cost estimation.

**Concrete Structures:** Working stress and Limit state design concepts; Design of beams, slabs, columns; Bond and development length; Prestressed concrete beams.

**Steel Structures:** Working stress and Limit state design concepts; Design of tension and compression members, beams and beam- columns, column bases; Connections – simple and eccentric, beam-column connections, plate girders and trusses; Concept of plastic analysis – beams and frames.

**Section 2: Geotechnical Engineering**

**Soil Mechanics:** Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Seepage through soils – two – dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of soils; One- dimensional consolidation, time rate of consolidation; Shear Strength, Mohr’s circle, effective and total shear strength parameters, Stress-Strain characteristics of clays and sand; Stress paths.

**Foundation Engineering:** Sub-surface investigations – Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method; Stress distribution in soils – Boussinesq’s theory; Pressure bulbs, Shallow foundations – Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – dynamic and static formulae, Axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction.

**Section 3: Water Resources Engineering**

**Fluid Mechanics:** Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.

**Hydraulics:** Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles.

**Hydrology:** Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation and routing, surface run-off models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s Law.

**Irrigation:** Types of irrigation systems and methods; Crop water requirements – Duty, delta, evapo-transpiration; Gravity Dams and Spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures.

**Section 4: Environmental Engineering**

**Water and Waste Water Quality and Treatment:** Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment. Sewerage system design, quantity of domestic wastewater, primary and secondary treatment. Effluent discharge standards; Sludge disposal; Reuse of treated sewage for different applications.

**Air Pollution:** Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality Index and limits.

**Municipal Solid Wastes:** Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).

**Section 5: Transportation Engineering**

**Transportation Infrastructure:** Geometric design of highways – cross-sectional elements, sight distances, horizontal and vertical alignments. Geometric design of railway Track – Speed and Cant. Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design. Highway Pavements:

**Highway materials –** desirable properties and tests; Desirable properties of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes

**Traffic Engineering:** Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections; Highway capacity.

**Section 6: Geomatics Engineering**

Principles of surveying; Errors and their adjustment; Maps – scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Horizontal and vertical curves.

Photogrammetric and Remote Sensing – Scale, flying height; Basics of remote sensing and GIS

**Section 7: Renewable Energy Sources**

**Solar energy:** Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy;

**Wind energy:** Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS;

**Biomass Energy:** Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes;

**Small Hydropower:** Overview of micro, mini and small hydro system, Types of hydro turbine;

**Ocean Energy:** Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion;

**Geothermal energy:** Origin of geothermal resources, Types of geothermal energy deposits;

**Hydrogen:** Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.

**Mechanical Engineering**

**Section 1: Materials, Manufacturing and Industrial Engineering**

**Engineering Materials:** Structure and properties of engineering materials, phase diagrams, heat treatment, stress-strain diagrams for engineering materials.

**Casting, Forming and Joining Processes:** Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.

**Machining and Machine Tool Operations:** Mechanics of machining; basic machine tools; single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, jigs and fixtures; abrasive machining processes; NC/CNC machines and CNC programming.

**Metrology and Inspection:** Limits, fits and tolerances; linear and angular measurements; comparators; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly; concepts of coordinate-measuring machine (CMM).

**Computer Integrated Manufacturing:** Basic concepts of CAD/CAM and their integration tools; additive manufacturing. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning; lean manufacturing.

**Production Planning and Control:** Forecasting models, aggregate production planning, scheduling, materials requirement planning; lean manufacturing.

**Inventory Control:** Deterministic models; safety stock inventory control systems.

**Operations Research:** Linear programming, simplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.

**Section 2: Fluid Mechanics and Thermal Sciences**

**Fluid Mechanics:** Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings; basics of compressible fluid flow.

**Heat-Transfer:** Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, Heisler’s charts; thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan- Boltzmann law, Wien’s displacement law, black and grey surfaces, view factors, radiation network analysis

**Thermodynamics:** Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.

**Applications:** Power Engineering: Air and gas compressors; vapour and gas power cycles, concepts of regeneration and reheat. I.C. Engines: Air-standard Otto, Diesel and dual cycles. Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles; properties of moist air, psychrometric chart, basic psychrometric processes. Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines; steam and gas turbines.

**Section 3: Applied Mechanics and Design**

**Engineering Mechanics:** Free-body diagrams and equilibrium; friction and its applications including rolling friction, belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc.; trusses and frames; virtual work; kinematics and dynamics of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations; Lagrange’s equation.

**Mechanics of Materials:** Stress and strain, elastic constants, Poisson’s ratio; Mohr’s circle for plane stress and plane strain; thin cylinders; shear force and bending moment diagrams; bending and shear stresses; concept of shear centre; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; testing of materials with universal testing machine; testing of hardness and impact strength.

**Theory of Machines:** Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.

**Vibrations:** Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts.

**Machine Design:** Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints; shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs.

**Section 4: Renewable Energy Sources**

**Solar energy:** Radiation measuring instruments, Basics of Flat plate collectors, Concentrating type, Principle of photovoltaic conversion of solar energy, Application of solar energy;

**Wind energy:** Characteristics and measurement, Wind energy conversion principles, Types and classification of WECS;

**Biomass Energy:** Classification of biomass. Physicochemical characteristics of biomass as fuel, Biomass conversion routes;

**Small Hydropower:** Overview of micro, mini and small hydro system, Types of hydro turbine;

**Ocean Energy:** Principle of ocean thermal energy conversion system, Principles of Wave and Tidal energy conversion;

**Geothermal energy:** Origin of geothermal resources, Types of geothermal energy deposits;

**Hydrogen:** Principle & operation, Applications; Fuel Cells: Types of fuel cell, Fuel cell system, Biogas, Biomethanation, Bio-CNG.

**Electronics & Communication Engineering**

**Section 1: Networks, Signals and Systems**

**Circuit analysis:** Node and mesh analysis, superposition, Thevenin’s theorem, Norton’s theorem, reciprocity. Sinusoidal steady state analysis: phasors, complex power, maximum power transfer. Time and frequency domain analysis of linear circuits: RL, RC and RLC circuits, solution of network equations using Laplace transform. Linear 2-port network parameters, wye-delta transformation. Continuous-time signals: Fourier series and Fourier transform, sampling theorem and applications. Discrete-time signals: DTFT, DFT, z-transform, discrete-time processing of continuous- time signals. LTI systems: definition and properties, causality, stability, impulse response, convolution, poles and zeroes, frequency response, group delay, phase delay.

## PEDA Assistant Manager AM Exam Pattern

We have given various links of PEDA Assistant Manager Recruitment 2021 in below page. Use the links to open the question papers and attend the exam by yourself. Mostly the PEDA AM Exam Pattern are given in Multiple Choice Questions – Descriptive Type, so already answers given applicants need to choose the right answers. Just understand the questions and start comparing all the answers, based on the difference the correct answer will predict by the aspirants from their PEDA Manager Exam Pattern preparation level. Soon start your preparation from here and end with the selection list from the result announcement. Keep rocking your studies to achieve your aims with your unlimited knowledge.

#### Manager, Assistant Manager (Technical)

S.No |
Name of the Subject |
No. of Questions |

Part-I | General Aptitude | 40 |

Part-II | Engineering Discipline | 60 |

#### Assistant Manager (Accounts)

S.No |
Name of the Subject |
No. of Questions |

Part-I | General Aptitude | 40 |

Part-II | Accounts | 60 |

#### Assistant Manager (Public Relation)

S.No |
Name of the Subject |
No. of Questions |

Part-I | General Aptitude | 40 |

Part-II | Communication and Journalism | 60 |

#### Programmer

S. No |
Name of the Subject |
No. of Questions |

Part-I | General Aptitude | 40 |

Part-II | Computer Fundamentals and Programming | 60 |

**Document / Certificate Verification**

Bringing much cheer to candidates, who have passed the PEDA Assistant Manager exam and plan to get the exam verify their qualification certificates before attending job interviews, an official release has stated that from now onwards candidates can avail the service online instead of spending valuable time at government offices. A candidate who has applied to the Commission on a previous occasion should produce the required documents even though they might have produced the same on a previous occasion and were returned to him. The Original Certificates in support of the claims made in the on-line application, should be produced at the time of the Certificate Verification – Oral Test or when called for by the Commission. One set of xerox copies of all certificates along with a copy of photograph identical to the one that was submitted in the application, should also be handed over while attending the Certificate Verification – Oral Test.

Aadhaar Card/ Printout of E-Aadhaar,

Voter ID Card,

Driving License,

PAN Card,

Passport,

ID Card issued by University/ College/ School,

Employer ID Card (Govt./ PSU),

Ex-serviceman Discharge Book issued by Ministry of Defence.

Any other photo bearing valid ID card issued by the Central/ State Government.

**PEDA Assistant Manager Previous Old Question Papers & Study Books, Preparation Materials**

The Previous Year Papers are available here. Contenders can easily download the PEDA Assistant Manager Last 10 Years Question Papers in English & Hindi. Stepwise procedure for downloading the PEDA AM Previous Year Question Paper for written examination is granted below. PEDA Manager Previous year Question Papers for 2018,2017,2016, 2015 and 2014 available in PDF free download below. The books are important for everyone to cover all the subjects wise syllabus topic, based on the official announcement, we have collected the book name with author name listed in below page. Aspirants are suggest to use the given Books and Study Materials for know the brief explanation for every chapter to deep preparation and get qualify in the upcoming written exam. The depth study helps to candidates to improve the understanding level and secure the maximum marks in the test.

**PEDA Manager Previous Year Question Papers, AM Model Old Paper**

**Preparation Tips**

The best time to study is in the morning itself. So, make sure you have got enough sleep at night so that you can get up early and cover what’s important.

Candidate should start to plan properly and create a suitable timetable to study.

Allocate time to learn new topics as this means learning everything.

After completing all the topics in the given syllabus, candidates are needing to revise all the prepared chapters to get remember with the help of keynote for avoiding confusion at the official exam commencement.

Learn the easy one along with one difficult topic.

No extra time will be allotted to you, in case you shall not be able to complete the entire paper. So, make sure you will have to complete within the allotted time.

Group study is use full to crack any written examination. Candidates are required to know the full syllabus of the exam.

Get update the syllabus and exam pattern to cover the complete details of the exam marking scheme and topics. Lastly, keep your motivation level high and don’t compare with anyone.

The exam is the first stage of the examination conducts for all the applied students. We enlisted the pointwise preparation steps to qualify in the written exam.

The exam commenced for a certain time allotted by the authority, candidates are should complete the exam within the given period. So, candidates are advised to make a practice to manage time by using old question papers.

## Upcoming Tests

**Punjab Police Domain Expert Previous Question Papers PDF Download**

**Punjab Police SI Admit Card 2021 Sub Inspector Call Letter Download Pdf**

**BFUHS CHO Admit Card 2021 NHM Punjab Community Health Officer Call Letter**

**Punjab Police Domain Expert Syllabus 2021 IT Assistant, AFO, ALO Test Pattern**

**PSSSB Supervisor Syllabus 2021 Punjab SSSB Exam Pattern Download**